1 Piece of 1" Rare Earth Neodymium Block Magnet 1x1x1"

Description: INCREDIBLE NEODYMIUM STRENGTHApplied Magnets Neodymium rare earth magnets are stronger than the strongest ceramic magnets! With a grade of N42, each magnet packs a huge magnetic energy punch and will last forever under normal use. Applied Magnets Neodymium is highly resistant to demagnetization and will not lose their magnetization around other magnets.APPLIED MAGNETSApplied Magnets is able to offer you the high quality Neodymium magnets with consistent performance. This Super Strong Neodymium Cup Magnet is extremely powerful and built to last. It’s designed & manufactured under stringent, top quality standards using the latest technology to ensure you receive the best Neodymium Magnet every time. 1 inch Strong NdFeB Neodymium Cube Magnet 1-pc, 2" Strong NdFeB Neodymium Cube Magnet Applied Magnets 1-pc, 1.8" Strong NdFeB Neodymium Sphere Magnet 2" x 2" x 1" Grade N52 Neodymium Block Magnet Pull ForcePull Force is the amount of force required to separate 2 of the same size magnets from each other.Actual pull force of cylinder/disc magnets may vary depending on different applications due to the small contact surface, please test them before usage.Rule of thumb is that the magnet will hold approx. 1/3 the weight of the stated pull force. So...If pull force stated is 90 lbs...the magnet will hold approx. 30 lbs in weight hanging from it.The Correct Way to Separate Your Applied Magnets Products !!CORRECT 1. Slide one magnet off the top of the stack. 2. Once off thestack,carefully start lifting the magnet. 3. Lift the magnet to free it from the stack.INCORRECT 1. DO NOT attempt to pull, lift, or pry amagnet from the stack before sliding it to the side. 2. DO NOT throw away the white storage spacers. 3. DO NOT allow the magnets to snap to each other or any magnetic surface. doing so may cause magnets to break!BE CAREFUL !!!1. Keep away from pacemakers. 2. Powerful magnets can hurt your fingers. 3. Not for children, parental supervision required. 4. All magnets may chip and shatter, but if used correctly can last a lifetime. 5. If damaged please dispose of completely. Shards are still magnetized and if swallowed can inflict serious damage. Frequently Asked Questions Q: When will my order ship?A: Orders are shipped within 1 business day of their receipt. Q: What does grade N52, N50, N48, N45 and N42 mean?A: The strength of neodymium magnets is given by a grading from N24 for the lowest strength magnets to N54 for the strongest. Each number higher is about 1% stronger than the previous number grade. Q: Can I cut or drill neodymium magnets?A: NO, with cutting or drilling there is a both a fire and fracture hazard and the dust is toxic. Q: How long will Neodymium magnets last?A: 400 years, if not subjected to sharp impacts or higher than rated temperatures. Q: What are the tolerances of our magnets?A: + or - 0.005" Q: Are our HYenergy line of wind turbines UL or ETL approved?A: Our HYenergy line of 5 blade wind turbines have ETL approval. ETL Will also pass for UL approval. Q: To what temperature can Neodymium magnets be subjected before they start losing their magnetic force?A: 176 degrees Fahrenheit or 80 degrees Centigrade. Q: Where are the poles on rectangular, bar, and block magnets?A: All our rectangular magnets are magnetized through the thickness. The poles are always on the surfaces of the 1st two numbers of the measurements. Q: Where are the poles on cylinder and disc magnets?A: The poles are always axially magnetized through the thickness. This means the poles are on the flat surfaces unless stated that they are diametrically magnetized which means the poles will be on the curved sides. Q: Do you offer combined shippingA: We do not offer combined shipping. Q: What is Pull Force? 1A: Pull Force is the amount of force required to separate 2 of the same size magnets from each other. Actual pull force of cylinder/disc/cup/ hook magnets may vary depending on different applications due to the small contact surface or magnets to curved surfaces due to the small contact surface. Please test them before usage. Q: What is Pull Force? 2A: Rule of thumb is that the magnet will hold approx. 1/3 the weight of the stated pull force. So if pull force stated is 90 lbs the magnet will hold approximately 30 lbs in weight hanging from it. Also if you are trying to stick the magnet to stainless steel the better the quality of the stainless steel the less the magnet will stick. Q: What are diametrically magnetized cylinder magnets?A: Diametrically magnetized cylinder magnets have the poles (attraction) on the curved sides instead of on the flat ends. Return Policy After receiving the item you must contact us within 14 Days. Your refund will be processed back to your PayPal account. The buyer is responsible for paying the return shipping charge. If for any reason, you are not satisfied with our products, you may return purchased products within 14 days of purchase. ALL RETURNS ARE SUBJECT TO A 15% RE-STOCKING FEE. You will get a refund for returned products if they are in original condition. We do not accept returns if returned products are not in the original condition. We do not accept returns for used or damaged magnets. If the returned magnets are not separated with original spacers but the magnets are in original condition, we will charge A 20% restocking fee. Shipping costs are not refunded. For free shipping listings, actual shipping cost will be deducted from refund.

Price: 19.99 USD

Location: Plano, Texas

End Time: 2024-11-23T19:43:24.000Z

Shipping Cost: 0 USD