20A-60A MPPT Solar Charge Controller 12V/24V/36V/48V Panel Battery LCD Regulator

Description: 20A-60A MPPT Solar Charge Controller 12V/24V/36V/48V Panel Battery LCD Regulator 20A 30A 40A MPPT Controller: Advantages:12V 24V 20A/ 30A/ 40A mppt Controller w/LCD Display,fit for 12V 24V AGM, Gel, Flooded and Lithium BatterySolar Regulator 40a, work with 60W~960W Solar power, Max input 480W100V Solar Power when battery is 12V, Max input 960W 100V when battery is 24V.Work with Lithium or lead-acid battery charging parameter preset, Advanced MPPT maximum power point tracking technology solar charge controller, tracking efficiency is no less than 99.5%.Controller Rated charge current 40A, the charging maximum conversion efficiency can reach 97 %.Solar controller 40amp with Excellent heat sink design and Multiple load control modes: 24Hours Working, Light Control, Light+Time Control Feature:Advanced MPPT maximum power point tracking technology charge controller with tracking efficiency is no less than 99.5%.High quality components solar charger the maximum conversion efficiency can reach97%.Super fast maximum power tracking speed controller while ensuring tracking efficiency.Accurate identification and tracking of the maximum power point of multi-wave peak.Reliable maximum input power of pv array to ensure the safety ofequipment.12 24v AUTO voltage identification, wide pv array maximum power point operating voltage range.The LCD is designed to dynamically display the operation data andworking status of the equipment.Various load control modes: general mode, light control mode, dualtime mode, pure charger mode and timing mode.Lead-acid and lithium charging process can be selected.dual usb port charging NOTE: The controller will start PWM function at high voltage disconnection (HVD) voltage point, which limited voltage rising to protect battery. Model POW-Keeper1220 POW-Keeper1230 POW-Keeper1240 Rated charge current 20A 30A 40A System rated voltage 12V/24V Auto work Voltage range of battery 8-32V Max open voltage of PV module 55V 75V 100V Battery type User default, Sealed, Flooded, GEL, LiFePO4 Equalized charging voltage Maintenance-fee lead acid battery 14.6V, GEL: No: Lead acid flooded battery: 14.8V Absorption charging voltage Maintenance-fee lead acid battery 14.4V,GEL: 14.2; Lead acid flooded battery: 14.6V Floating charging voltage Maintenance-fee lead acid battery,GEL, Lead acid flooded battery: 13.8V Low voltage re-connection (LVR) Maintenance-fee lead acid battery,GEL, Lead acid flooded battery: 12.6V Low voltage disconnection (LVD) Maintenance-fee lead acid battery,GEL, Lead acid flooded battery: 10.8V Static loss <9.2mA 12V; <11.7mA 24V High voltage disconnection (HVD) 16V (24V x 2) Duration of absorption charging 2 Hours Light control voltage 5V Charge loop voltage drop <0.29V LCD Temperature -20°C~+70°C Operating Temperature -20°C-+55°C (To run at full rated current continuously) Operating Temperature -20°C-+55°C (To run at full rated current continuously) Working humidity <95% No condensation Protection class IP30 Dimension (LxWxH) mm 123x178x48 135x202x55 150x220x67 3 modes load working design:Manual mode: you can turn on/off your LOAD manual.Solar light control Mode: When PV voltage drop to 5V, controller identified as sunset, then turn on the LOAD；Morning PV voltage raise to 5V, controller identified as Sunrise will turn off your Load.Solar light+Time control Mode: Sunset turn on Load, then set a working time, controller will turn off at specified time which set by yourself. PowMr MPPT Controller Newest DesignController with Great Heat sinkHigh quality components Clear display and Simple wiring to useEASY WIRING: Press and push forward controller's cover first, then insert your battery cable and PV cable,Clear display: Use Menu and Set, view controller's charging parameter. Solar Controller Wiring tipsFor Safety, When install your battery and PV cable to Solar Controller, Please make sure your Breaker is on Open position, which means cable has no power go through the cable.After PV and battery cable installed, Close Battery's Breaker first, let controller read your battery frist and Controller will power on.Then Close PV breaker let PV power enter controller to charge your battery after controller display power on. 60A MPPT Controller: PowMr Solar Charger Controller MPPT 60A 12V 24V 36V 48V Blacklight LCD Regulator Max PV Input 150VDC Support Lithium batteries Advantages: 【60A MPPT CHARGING CONTROLLER】 4-stage battery charging algorithm for a rapid, efficient , safe charging(Bulk Charge, Boost Charge, Float Charge,and Equalization), 60amp Rate Charging current. 【Controller WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT】Controller support High PV Input Power/voltage. Controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V；1440W 105V when 24V; 2100W 150 when 36V; 2800W 150v when 48V. 【12V/24V/36V/48V BATTERY SUPPORT】Negative grounding design controller more safe, controller Compatible with a variety of batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according your need. 【0 layer MPPT charge controller】Easy to know Charging process in one glance. 【FULL CHARGING PROTECTIONS】Short Circuit/Overcurrent/Reverse Polarity,etc.protections; Very detail LCD screen and 4 buttons make this solar controller very simple to use. And detail troubleshooting list, Fast service support and Simple and detail wiring instruction avaiable. Feature:- M6-PRO Support one-key restore function- MPPT 30A/40A/50A/60A solar charge controller- 100% MPPT technology- 0 Layer, easy installation, easy setup- Built-in DSP controller with high performance- Automatic switch for 12V/24V/36V/48V battery bank- 3-stage charging optimizes battery performance- Overcharge protection, Input PV polarity reverse protection, Output limited current protection,- Over-temperature protection- Troubleshooting promotion function.- Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc- Easy to be mounted Specification:Technical Specification for Selection GuideModelsPOW-M60-PROCharging modeMPPT Maximum power point tracking automaticallyCharging3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating chargeSystem typeDC12V/24V/36V/48V Recognition automaticallySystem voltage automatic recognition1 2V system (DC9V-DC15V)24V system (DC18V-DC29V)36V system (DC30V-DC39V)48V system (DC40VDC60V)Soft start time<1SDynamic response and recovery time>98.1 % (Voc is 1.5 or 2 times than battery, then it's the best efficiency)PV utilization>99%Input specificationVOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it's the best efficiency.)12V system (DC20VDC80V)24V system (DC37V-DC105V)36V system (DC50VDC160V)48V system (DC72VDC160V)The maximum PV input voltage (Voc)DC190V(The controller can't work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.)The maximum PV input power (The total power rated of PV can't be over this watt that will break the controller.)12V system (720W)24V system (1440W)36V system (2100W)48V system (2800W)Output specificationSelectable battery type(default is Sealed)Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user)Absorption Charging VoltageRefer to Batteries charging referenceFloating Charging VoltageRefer to Batteries charging referenceOvercharging protection voltage12V system (15V)24V system (30V)36V system (45V)48V system (60V)Rated output current60ATemperature Coefficient±0.02%/ °CAutomatic temperature compensation14.2V-(Max temperature-25 °C)*0.3Output voltage ripple-peak100mvOutput voltage accuracy<±1%Input Anti-intrusion protectionyesTemperature Protection75°CTemperature increased protectionOutput power will reduce when it's more than 70 °COutput power will be normal when it's less than 55 °CFan-on temperature>40 °CFan-off temperature<35 °CAcoustic noise<40dBCooling wayForced air coolingComponentsImported materials, Accord to EU standards, Industrial grade range.Environmental requirementsMeet 2002/95/EC; No cadmium, hydrides, and fluoridesSecurity LevelAccord to CE, PSE, FCC, EMC, EN60950Electromagnetic CompatibilityAccord to EN6W00, EN55022, EN55024EnclosureIP21Net weight(Kg)1.3Gross weight(Kg)1.5 60A Controller Detail Unique design ControllerThis controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the batteryMetal heat sinkPerfecting system performance, with maximum conversion efficiency of 98%COPPER COILSGenuine MPPT controller, The Three copper coils play a step-down role to make your system work more stable.Wiring PORTSMounting Holes: 4 x Ø10mmhigh-quality wiring terminal 60A Controller Charging parameterSystem voltage: 12V / 24V / 36V / 48V DC AutoRated charge current: 60ASuggestion wiring:when battery 12V, suggest input solar voltage range DC20V~DC80V; Solar power 720W;when battery 24V, suggest input solar voltage range DC37V~DC105; Solar power 1440W;when battery 36V, suggest input solar voltage range DC50V~DC160V; Solar power 2100W;when battery 48V, suggest input solar voltage range DC72V~DC160V;Solar power 2800W; Battery support:12V 24V 36V 48V Deep cycle Sealed, Gel, Flooded and Lithium,User battery. (Support Customizable charging voltages)Battery System Voltage read: DC9V~DC15V (controller will read as 12V system) / DC18V~DC30V (24V) / DC32V~DC40V (36 V) / DC42V~DC60V (48V) (First connection please make sure your battery has enough voltage) After controller read your battery, please select correct battery type. Mounting informationBattery must be connected first. NEVER connect the solar panel array to the controller without a battery.Ensure input voltage does not exceed 190 VDC to prevent permanent damage.Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.Do NOT connect any inverters or battery charger into the load terminal of the charge controller.Place the controller on a vertical surface protected from direct sunlight, high temperatures, and water. Make sure there is good ventilation.Please check for Clearance, verify that there is sufficient room to run wires, as well as clearance above and below the controller for ventilation. The clearance should be at least 3 inches (75mm).About USDelivery DetailsTerms of salesContact usDelivery WorldwideAbout US Delivery Details Our warehouses are located in California, we will ship goods out for you within 24 hours. We offers a variety of shipping methods such as USPS, UPS, FEDEX. 1. Shipment Time: Your order will be sent out WITHIN THE HANDLING TIME.HANDLING TIME are based on 1 business days (Monday to Friday) excluding Holidays and weekends. After sending out the item, we will send you a notification letter, with the shipment information of the tracking number. 2. Shipment Type: The order of multi items may be sent via MULTI PACKAGES.If your order is including MULTI ITEMS, we may send the item to you via MULTI PACKAGES. If something is missing in the first package you received, please don't open a case or return, please ask us first, we will check if your order is sent via multi packages. 3. Delivery Time: DIFFERENT LOCATION, DIFFERENT SHIPPING TIME.In normal condition, the shipping time is about 2-5 working days. Some of that may be 5-10 working days.If you want to check the delivery time of your order, please kindly ask us first. Last but not Least, PLEASE DON'T OPEN THE CASE AND RETURN REQUEST/LEAVE NEGATIVE FEEDBACK FOR US BEFORE Before sending us a letter!!!Any issues, please kindly contact the customer service of our store FIRST.Terms of sales 1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired. 2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part. 3. For all returned products, Please contact us for the returning address and Pls do not open return case. 4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.Contact us1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours. 2. Feedback is important to us, we will leave positive to our customers. 3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. 4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. Delivery Worldwide

Price: 37.99 USD

Location: Walnut, California

End Time: 2023-11-28T08:37:20.000Z

Shipping Cost: 0 USD