Amped Airsoft SLP Regulator Air Rig (Regulator + Line), Black

Description: Please note, this air rig can NOT use any HPA tank that outputs higher than 300 PSI! SLP tanks are required! This system is able to work with any SLP regulated HPA tank. This means that the tank must output at a pressure of 300 PSI or lower. Most typical HPA tank regulators output anywhere from 600-800 PSI. This lower HPA Output does not affect the performance of your gun since it requires well under 300 PSI of input. As a mater of fact, this means that your PSI needs to be stepped down less to be at an acceptable level (120PSI or less). These air rigs are equipped with the state of the art Amped Line, which is a large bore line for your HPA Unit that is both flexible and durable. It is enclosed in a nylon sheathing that will not affect it's flexibility but will help protect it from damage. Each air rig is tested after being assembled. This air rig is designed to withstand some serious milsim gameplay. Have peace of mind when you're on the field knowing that your Amped SLP Air Rigs are hand-made and tested in Pittsburgh, Pennsylvania in the United States of America. Best of all, Amped Lines carries a limited life time warranty against manufacturer's defects while the Air regulator has limited 1 year warranty against manufacture defects. The Pros and Cons of this system are as follows: PROS Light Weight/Less Bulky/Take up less room in pack Under half the price of most air rigs on the market for the same performance and reliablity. Ease of PSI adjustment Includes the latest state of the art Amped Line Very easy to maintain and one of the most reliable and consistant regulators on the market Comes with the QD fitting you need to attach a Polarstar Engine to your choice of SLP tank. Warranty of 1 Year against manufacture defects on regulator Lifetime Warranty against manufacture defects on Amped Line CONS Can not use a normal HPA tank. Must be at or under 300 PSI! Can not be run on Daytona Gun Setups Max pressure for this line is 200 PSI. Max output pressure of this regulator is 120psi.

Price: 89.99 USD

Location: Milwaukee, Wisconsin

End Time: 2024-11-30T21:56:49.000Z

Shipping Cost: N/A USD