Description: Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With over 12 years of specialized experience, trust us to elevate your driving experience seamlessly. This fixed-price listing includes the AudioControl ACX-600.1 all-weather mono block 600 watts compact amplifier. AudioControl’s ACX-600.1 all-weather monoblock amplifier delivers honest power levels to the sound system in your boat, utv, motorcycle, and more. The ACX-600.1 will ensure your open-air speakers and subwoofers deliver plenty of punch and clarity, all day long. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making tmaking this amplifier the perfect solution for your next adventure. This amplifier carries an IPX6 waterproof rating, which means a powerful water jet spray won't hurt a thing. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, and waterproof input, output, and power connections. The ACX-600.1 can send up to 600 watts RMS to your sub — plenty enough to feel the bass pound clearly over the sounds of wind and motor. AudioControl's AccuBASS® processing plus low-pass and subsonic filters help you achieve the best bass tone possible for your subwoofer. This compact amp will fit almost anywhere in almost any kind of vehicle, and it features high-level inputs with signal-sensing turn-on, so it'll work with almost any stereo system. In The Box Mono amplifier (attached 12" power/ground/input/output harnesses)7" Power & ground harness7" Speaker output harness16.5' ACR-1 Remote Level Control cable w/ an RJ-14 plug on one end and a male 3.5mm plug on other end (ACR-1 Remote Level Control not included)Power & ground connector (empty)2 Crimp-on terminals for power & ground harnessHarness locking pin.2 Rubber grommetsFour 3/4" screwsQuickstart guide ACX-600.1 Features 1 x 350 watts @ 4 Ohms1 x 600 Watts @ 2 OhmsIPX6 RatedGTOTM Signal SenseOptional wired ACR-1 Remote Control for Output LevelHigh and low input modesLinkwitz-Riley CrossoverBulletproof 5-year warranty (when installed by an authorized AudioControl dealer) High-/Low-Level Inputs: The ACX-600.1 includes two built-in 12" RCA inputs that can accept either high- or low-level input signals. If running high-level signals, RCA to speaker-wire adapters must be used (sold separately), or the RCA connectors must be cut off and the bare-ended wire used. Low-Level Input Range: 500mV - 6Vrms High-Level Input Range: 1Vrms - 12Vrms AccuBASS: The patented AccuBASS processing circuit compensates for factory bass rolloff to improve bass performance, especially with most factory installed sound systems. The circuit has two rotary controls: the Threshold lets you dial in the level at which the AccuBASS will begin to work, and a Level control that adjusts the amount of AccuBASS compensation. Crossovers: The ACX-600.1 includes a 12 dB/octave Linkwitz-Riley low-pass filter with a 3-position switch to change the crossover point. Options include 80Hz, 120Hz, or Bypass. Gain Maximized LEDs: The mono amp's inputs include a Gain control to the properly set the overall output level. A Maximized LED indicator will light to let you know when the output signal has reached its optimum performance level, helping to avoid running a distorted signal to your speakers. GTO (Great Turn On) Signal Sense: If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period with no signal input, the amp will turn itself off. Optional Wired Remote Control: The ACX-600.1 amplifier features a female 3.5mm jack on a built-in 12" harness, letting you connect an optional ACR-1 wired remote control (sold separately). A 16.5' ACR-1 connection cable is provided, with a male 3.5mm connector on one end and an RJ-14 connector on the other end, that connects to the wired controller. All-Weather Construction: The ACX-600.1 amp has been constructed to withstand outdoor environments and carries an IPX6 waterproof rating, making it impervious to weather. A removable cover-plate on top of the amp protects the controls and LED indicators from dust and moisture ingress. The cover-plate screws require a 2.5mm hex bit for removal (not included). All wire harnesses on the amp are built-in for added weather resistance: Audio Inputs: Two RCA jacks on 12" input cables are provided, each with protective plastic caps. Speaker Output: A 12" 2-pin speaker wire output is terminated in a waterproof connector and includes a matching 7" harness with bare-ended wire. Power/Ground/Remote: A 12" length of 8-gauge power and ground wire terminates in a waterproof connector, with matching 7" bare-ended harness. An additional empty power/ground connector is provided, letting you build your own harness to match the amp's power/ground connector. A bare-ended 12", 18-gauge remote turn-on wire is provided in the power/ground harness. Note: The Amplifier is not equipped with a fuse. An external 60-amp AFS, AGU, or MAXI fuse must be installed on the power wire. If a wiring kit is used which includes a fuse with a value other than 60-amps, the original should be replaced with a 60-amp fuse. Mounting: The AudioControl ACX-600.1 features built-in mounting flanges on either end of the amp, with two pre-drilled holes in each, allowing the amp to be mounted in a variety of locations. Four 3/4" screws are provided for mounting. ACX-600.1 Specifications Preamp/Speaker-Level Inputs: 2 (RCA) Preamp-Level Voltage Range: 500mV-6Vrms Speaker-Level Voltage Range: 1Vrms-12Vrms Continuous Output Power (14.4V): 4Ω: 350W RMS x 1 2Ω: 600W RMS x 1 Frequency Response: 26Hz-20kHz Signal to Noise Ratio: 102dBA, Ref 50W @ 4Ω THD+N: <0.05% Low-Pass Crossover: 12dB/octave Linkwitz-Riley, 80Hz/120Hz/Bypass Weather-Proof Rating: IPX6 Dimensions: Width = 10.12", Height = 2.38", Depth = 5.32" Weight: 4.45 lbs. AudioControl Warranty Policy AudioControl products are designed, engineered, and tested at our facility located in the Pacific Northwest, USA. Given our huge commitment to quality, AudioControl comfortably warranties all materials and workmanship on our products for a period of two years from the date of purchase, provided it is installed by an authorized AudioControl dealer. Should you choose to install it yourself, your warranty is one year from the date of purchase from an authorized AudioControl dealer.A Few Words About Warranties People are scared of warranties. Lots of fine print. Months of waiting around. Well, fear no more, this warranty is designed to make you rave about us to your friends. It’s a warranty that looks out for you and helps you resist the temptation to have your friend, “…who’s good with electronics”, try to repair your AudioControl product. So go ahead, read this warranty, then take a few days to enjoy your new AudioControl processor before registering the warranty card and comments.“Conditional” doesn’t mean anything ominous. The Federal Trade Commission tells all manufacturers to use the term to indicate that certain conditions have to be met before they’ll honor the warranty. If you meet all of these conditions, we will warranty all materials and workmanship on your AudioControl product for one year from the date you bought it from an authorized AudioControl dealer (two years if it is installed by an authorized AudioControl dealer). We will fix or replace it, at our option, during that time.Here Are The Conditional Conditions1. You have to go online and register your AudioControl products. Alternatively, you may fill out the Warranty Registration card that came with your product and mail it to us.2. You must keep your sales receipt for proof of purchase showing when and from whom the unit was bought. We’re not the only ones who require this, so it’s a good habit to get into with any major purchase.3. Your AudioControl products must have originally been purchased from an authorized AudioControl dealer. You do not have to be the original owner, but you do need a copy of the original sales slip.4. You cannot let anybody who isn’t: (A) the AudioControl factory; (B) somebody authorized in writing by AudioControl to service your product. If anyone other than (A) or (B) messes with your AudioControl product, that voids your warranty.5. The warranty is also void if the serial number is altered or removed, or if your AudioControl component has been used improperly. Now that sounds like a big loophole, but here is all we mean by it. Unwarranted abuse is: (A) physical damage (don’t use it to level your RV); (B) improper connections (120 volts AC into a 12 volt DC power jack can fry the poor thing); (C) sadistic things (your imagination is best kept private).. This is the best product we know how to build, but if you mount it to the front bumper of your car or use it as a counter-weight for your daughter’s trebuchet project, something will go wrong.6. If an authorized United States AudioControl dealer installs your component, the warranty is two years.Assuming you conform to 1 through 6, and it really isn’t all that hard to do, we get the option of fixing your old unit or replacing it with a new one. To initiate a warranty claim, please contact AudioControl and we will issue an RA (Return Authorization) number and provide shipping instructions. Products received at AudioControl without an RA number will be refused.Legalese Section This is the only warranty given by AudioControl. This warranty gives you specific legal rights that vary from state to state. Promises of how well your AudioControl component will perform are not implied by this warranty. Other than what we have covered in this warranty, we have no obligation, express or implied. Also, we will not be obligated for direct or indirect consequential damage to your system caused by hooking up your AudioControl component.Failure to properly register your AudioControl warranty may negate any service claims. Additional Notes We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.
Price: 299 USD
Location: San Juan, Puerto Rico
End Time: 2024-10-27T23:06:36.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: AudioControl
Model: ACX-600.1
MPN: ACL-ACX-600.1
Country/Region of Manufacture: China
RMS Power: 600W
Channels: Mono
California Prop 65 Warning: WARNING: Cancer and Reproductive Harm