C7 Corvette LT1, LT4, LT5 Oil Cooler Adapter

Description: The C7 Corvette's water to oil heat exchanger is appropriate for a street car but is wildly insufficient for track or performance use. Those looking to delete the factory heat exchanger and replace it with a high-efficiency air to oil cooler can use Improved Racing's oil cooler adapter. This adapter is recommended for track and performance use only, as it does not feature a thermostat. For street-driven cars, we recommend our thermostatic adapter, part number EGM-132. The adapter features standard female -8AN O-ring boss ports that accept optional male adapter fittings for -8AN, -10AN or -12AN lines. Two IN and OUT ports provide flexibility in line routing. Plugs are included for the two extra extra ports and an optional sensor adapter fitting may be used to accept an 1/8" NPT or M12x1.5 sensor. The extra ports can also be used for turbo oil feed lines or for plumbing an oil accumulator. Features and Benefits 100% bolt-on in place of the factory heat exchanger, just above the oil filter Extra inlet and outlet ports can be used for sensors, turbo oil feed lines, or an oil accumulator Retains stock oil filter location Oil exiting the adapter is filtered oil 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish High-temp Viton seals Lifetime Warranty Made in the USA Optional fittings available for -8AN, -10AN, or -12AN lines Includes 1x Oil cooler adapter block for LT1/LT4 engines 1x Gasket, GM part # 12623359 2x Zinc-plated steel mounting screws 2x -8AN plugs Detailed installation instructions Optional Add-Ons 2x Black anodized -8AN, -10AN, or -12AN adapter fittings with Viton O-rings 1/8" NPT or M12x1.5 sensor port adapter fittings Installation Notes This oil adapter is designed for O-ring boss fittings with a straight thread length of 0.500" or less. We recommend using our fittings in order to guarantee proper fitment and seal. We recommend using a straight hose end fitting for the OUT port and a 90-degree hose end fitting for the IN port. For additional clearance, use our low profile hose end fitting, part number DO-090-08-08 (-8AN lines) or DO-090-10-08 (-10AN lines). Note that no O-ring boss adapter fitting is needed when using this low-profile hose end. Applications 2014-2019 Chevrolet Corvette (C7), all models Factory oil cooler delete is required. Purchase Improved Racing delete kit part # EC7-681. GM oil pan part numbers 12684491, 12696685, and 12696686 May fit GM trucks with Gen V Chevrolet small block V8 engines May fit other vehicles using the Gen V Chevrolet small block LT1, LT4, LT5, L86 and L83 engines Does not fit GM truck oil pan part # 12696280 Does not fit 6th GenCamaro SS and ZL1 oil pan (use part # EGM-136 instead) Does not fit 2014-2019 Cadillac CTS-V oil pan (use part # EGM-136 instead) Does not fit 2020+ Cadillac CT5 Blackwing Parts Sold Separately Important: The optional parts below are sold separately. Line Adapter Fittings (Optional) Use these fittings to adapt the ports to the line sizes listed below. These fittings are required except when using hose ends with male O-ring boss connections. Line Size Part Number Qty Required -8AN OM-08-08 2 -10AN OM-08-10 2 -12AN OM-08-12 2 Sensor Port Adapter Fittings (Optional) Use these fittings to add a sensor to either accessory port. Sensor Thread Size Part Number Qty Required 1/8" NPT OP-08-02 0-2 M22x1.50 OF-08-M12 0-2

Price: 159 USD

Location: Orlando, Florida

End Time: 2023-12-28T18:47:48.000Z

Shipping Cost: 9.95 USD