Cisco 3504 Wireless Controller AIR-CT3504-K9 V03 NO LIC TESTED

Description: Used working pull. Cosmetic condition is very good. Some light scratches. See pictures for details. Firmware version is v8.10.185.0. Reset to factory settings. PLEASE NOTE: This controller was used as a spare so there is no licenses installed. Includes the following: - Cisco 3504 Wireless Controller (P/N: AIR-CT3504-K9 V03) - Genuine Cisco/Delta Electronics AC Adapter (P/N: 341-100765-01) - North American Power Cord No cables or other accessories included. ------------------------ >>> CONSOLE LOG ------------------------ Cisco bootloader . . . Cisco BootLoader Version : 8.5.103.0 (Cisco build) (Build time: Jul 25 2017 - 07:47:10) Octeon unique ID: 04800800817ca59e00ca OCTEON CN7240-AAP pass 1.3, Core clock: 1500 MHz, IO clock: 800 MHz, DDR clock: 1067 MHz (2134 Mhz DDR) DRAM: 8 GiB Clearing DRAM...... done CPLD Revision : a5 Reset Reason : Soft reset due to RST_SOFT_RST write SF: Detected W25Q64CV with page size 256 Bytes, erase size 4 KiB, total 8 MiB MMC: Octeon MMC/SD0: 0 (Type: MMC, Version: MMC v5.1, Manufacturer ID: 0x45, Vendor: Man 450100 Snr 01effcd8, Product: DG4032, Revision: 0.1) Net: octmgmt0, octmgmt1, octeth0, octeth1, octeth2, octeth3, octeth4, octeth5, octeth6 SF: Detected W25Q64CV with page size 256 Bytes, erase size 4 KiB, total 8 MiB Press now to access the Boot Menu... Loading primary image (8.10.185.0) 89675787 bytes read in 2052 ms (41.7 MiB/s) Launching... Verifying images... OK Launching images... PP0:~CONSOLE-> Using device tree PP0:~CONSOLE-> Version: Cavium Inc. OCTEON SDK version 3.1.2-p7, build 591 PP1:~CONSOLE-> Version: Cavium Inc. OCTEON SDK version 3.1.2-p7, build 591 PP2:~CONSOLE-> Version: Cavium Inc. OCTEON SDK version 3.1.2-p7, build 591 PP3:~CONSOLE-> Version: Cavium Inc. OCTEON SDK version 3.1.2-p7, build 591 PP0:~CONSOLE-> Application in 64-bit mode (ptrsize= 8 bytes) PP0:~CONSOLE-> # cvmcs: Cores are running at 1500000000 Hz PP0:~CONSOLE-> # cvmcs: BOOT CORE: Core 0; DISPLAY CORE: Core 3 PP0:~CONSOLE-> SDK Build Number: 3.1.2-p7, build 591 PP0:~CONSOLE-> Platform Initialization... Platform board =24590 PP0:~CONSOLE-> # fp_hal_platform_init: WLC-Kukri core_mask=0xf num_cores=4 pool=204800/102400/34794/128 PP0:~CONSOLE-> Octeon68xx/73xx found in it_iqs PP0:~CONSOLE-> Done with all fp init functions PP0:~CONSOLE-> Initializing Phy ports, queues PP0:~CONSOLE-> Node 0 Interface 0 has 4 ports (SGMII) PP0:~CONSOLE-> Node 0 Interface 1 has 4 ports (XFI) PP0:~CONSOLE-> Node 0 Interface 2 has 2 ports (SGMII) PP0:~CONSOLE-> Node 0 Intee 3 as 128 ports (NPI) PP0:~CONSOLE-> Node 0 Interface 4 has 4 ports (LOOP) INIT: PP0:~CONSOLE-> PP0:~CONSOLE-> PP0:~CONSOLE-> Active FP Cores in System = 04. PP0:~CONSOLE-> PP0:~CONSOLE-> PP0:~CONSOLE-> Booting DP ID 0 version 2.88 booting Configuring network interfaces... done. PP0:~CONSOLE-> Warning: Enabling PKI when PKI already enabled. Starting udev Decompressing... OK Validating......MD5 0af5a91dffce3fe3dc6503a4a703fcfc 0af5a91dffce3fe3dc6503a4a703fcfc OK Setting up the kernel dump handler.. INIT: Entering runlevel: 3 Detecting Hardware ... /sbin/oct-linux-csr: line 2: oct-remote-csr: Permission denied /sbin/oct-linux-csr: line 2: oct-remote-csr: Permission denied /sbin/oct-linux-csr: line 2: oct-remote-csr: Permission denied /sbin/oct-linux-csr: line 2: oct-remote-csr: Permission denied /sbin/oct-linux-csr: line 2: oct-remote-csr: Permission denied Loading host drivers.. Starting Ulogd... Starting NA Connector... Starting DB Services... Cryptographic library self-test.... Testing SHA1 Short Message 1 Testing SHA256 Short Message 1 Testing SHA384 Short Message 1 SHA1 POST PASSED Testing HMAC SHA1 Short Message 1 Testing HMAC SHA2 Short Message 1 Testing HMAC SHA384 Short Message 1 passed! XML config selected Validating XML configuration octeon_device_init: found 1 DPs Cisco is a trademark of Cisco Systems, Inc. Software Copyright Cisco Systems, Inc. All rights reserved. Cisco AireOS Version 8.10.185.0 Initializing OS Services: ok Initializing Serial Services: ok Initializing Network Services: ok Starting Statistics Service: ok Unable to open dx flag file Starting ARP Services: ok Starting Trap Manager: ok Starting Data Externalization services: ok Starting Network Interface Management Services: ok Starting System Services: Read from Flash Completed ... ok Starting FIPS Features: ok : Not enabled Starting SNMP services: ok Starting Fastpath Hardware Acceleration: ok Starting Fastpath DP Heartbeat : ok Fastpath CPU0.00(0): Starting Fastpath Application. SDK-Cavium Inc. OCTEON SDK version 3.1.2-p7, build 591. Flags-[DUTY CYCLE] : ok Fastpath CPU0.00(0): Initializing last packet received queue. Num of cores(4) Fastpath CPU0.00(0): Initializing Global Packet Queue. Num of packets supported(1000) Fastpath CPU0.00(0): Core 0 Initialization and FIPS self-test: ok Fastpath CPU0.00(0): 4 Cores are being initialized Fastpath CPU0.00(0): Initializing Timer... Fastpath CPU0.00(0): Initializing Timer...done. Fastpath CPU0.00(0): Initializing Timer... Fastpath CPU0.00(0): Initializing NBAR AGING Timer...done. Fastpath CPU0.00(0): Initializing Data Ports....done Fastpath CPU0.01(0): Core 1 Initialization and FIPS self-test: ok Fastpath CPU0.02(0): Core 2 Initialization and FIPS self-test: ok Fastpath CPU0.03(40): Core 3 Initialization and FIPS self-test: ok Starting Switching Services: ok Starting QoS Services: ok Starting Policy Manager: ok Starting Data Transport Link Layer: ok Starting Access Control List Services: ok Starting System Interfaces: ok Starting Client Troubleshooting Service: ok Starting Certificate Database: Initializing Curl Globally.. ok Starting VPN Services: ok Starting Management Frame Protection: ok Starting DNS Services: ok ok HBL initialization is successful Starting Licensing Services: ok Starting Redundancy: ok Start rmgrPingTask: ok Starting LWAPP: ok Starting CAPWAP: ok Starting LOCP: ok Starting Security Services: ok Starting OpenDNS Services: ok Starting Policy Manager: ok Starting TrustSec Services: ok Starting Authentication Engine: ok Starting Mobility Management: ok Starting Capwap Ping Component: ok Starting AVC Services: ok Starting AVC Flex Services: ok Starting Virtual AP Services: ok Starting AireWave Director: ok Starting Network Time Services: ok Starting Cisco Discovery Protocol: ok Starting Broadcast Services: ok Starting Logging Services: ok Starting DHCP Server: ok Starting IDS Signature Manager: ok Starting RFID Tag Tracking: ok Starting RF Profiles: ok Starting Environment Fan Status Monitoring Service: ok Starting Mesh Services: ok Starting TSM: ok Starting CIDS Services: ok Starting Ethernet-over-IP: ok Starting DTLS server: enabled in CAPWAP In hreapLoadConfig. Loading config has failed. loading default config Starting CleanAir: ok Starting WIPS: ok Starting SSHPM LSC PROV LIST: ok Starting RRC Services: ok Starting SXP Services: ok Starting Alarm Services: ok Starting FMC HS: ok Starting IPv6 Services: ok Starting Config Sync Manager : ok Starting Hotspot Services: ok Starting Tunnel Services New: Failed Starting PMIP Services: ok Starting Portal Server Services: ok Starting mDNS Services: ok Starting Management Services: Web Server: CLI: Secure Web: ok SSH: Starting IPSec Profiles component: ok Starting FEW Services: ok Starting MS Agent Services: ok ok Starting CPU ACL Logging services: ok (Cisco Controller) Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults) User: admin Password:********* Warning:In SNMPV2 No Defaults Presents. Please use command: config snmp community create Warning:In SNMPV3 No Defaults Presents. Please use command: config snmp v3user create (Cisco Controller) >show license all Feature name: ap_count License type: Evaluation License Eula: Not Accepted Evaluation total period: 12 weeks 6 days Evaluation period left: 89 days License state: Active, Not-In-Use License Nodelocked: Yes RTU License Count: 150 ================================== Total available count : 150 Total inuse count : 0 (Cisco Controller) license> ---------------------- >>> SALES TERMS ---------------------- Sold AS-IS, no warranty, no return. Items paid using eChecks will only be sent once payment have cleared. Typical wait time for this payment method is 8-10 business days. Faster shipping is available. Please inquire before buying. If you have any questions, feel free to ask. Thank you for your interest!

Price: 550 CAD

Location: Saint-Hyacinthe, Quebec

End Time: 2024-11-10T17:12:44.000Z

Shipping Cost: 32.64 CAD