DIY DENTURE KIT Custom Homemade Dentures For Begginers * FULL /PARTIAL*

Description: How It Works 1. Place the wax in a container and heat until melted 2. Take out the heated wax and shape it by hand to suit you 3. Insert the resin denture into the wax 4 ways to harden wax: 1. Cooling: Place the soft wax at room temperature, and over time, the wax will gradually lose heat and solidify back into a solid state. The speed of this process depends on the ambient temperature and the type of wax, and typically the wax will fully harden within a few hours to a day at room temperature. 2. Freezing: Place the soft wax in the freezer compartment of the refrigerator or freezer. Due to the low temperature environment of the freezer compartment, the temperature of the wax will rapidly decrease, thereby accelerating the solidification process. This method is particularly suitable for situations that require rapid hardening, such as making candles or conducting certain scientific experiments. It should be noted that the frozen wax should be handled carefully when removed to avoid cracking due to excessive temperature differences. 3. Use a fan to accelerate air flow: Place the soft wax in a well ventilated area and use a fan to blow it towards the surface of the wax, which can increase the contact area and frequency between the wax and cold air, thereby improving the solidification speed of the wax. Although this method is not as effective as freezing, it is still a good choice without freezing equipment. 4‌. Temperature control: Placing wax in a lower temperature environment can make it harder. Generally speaking, an environment between 0-10 degrees Celsius is more suitable. However, it should be noted that too low a temperature may cause changes in the performance of the wax, and even crack Tip: This product is suitable for novice practice and training

Price: 24.8 USD

Location: qingdaoshichengyangquyutinglu61hao

End Time: 2025-01-22T02:49:37.000Z

Shipping Cost: 0 USD