Description: Hello, this auction is for a completely rebuilt 514 cubic inch big block Ford engine. This started out as a 460 Ford, it has been bored .030 oversize and stroked. If you have a car or a boat with a 460 or are planning building somthing with a big block Ford here is a chance to get a race ready engine at a bargin basement price. This auction is for a longblock less camshaft, lifters, pushrods, and rocker arms. New cam bearings are installed and it is ready for valvetrain of your choice. The work done to this engine is as followes: 1. Engine block has been oven cleaned, shot peened and magnafluxed. It has no cracks, repairs, damage or sleeves. 2. After cleaning the block has been square decked, bored, and honed to .030 oversize. Both the boring and the decking is preformed in an RMC fully automatic CNC machine. This ensures all of the cylinders and the deck surface are completely parrall to the main journals. During the honing process torque plates are used to elimante cylinder wall distoration and make for perfect ring sealing. Prior to assembly all threaded holes were chased, new freeze plugs, oil galleys, and cam bearings were installed. The exterior of the block has been painted Ford gloss black. 3. Both the crankshaft and the connecting rods are manufactured by ProComp Motorsports. The crankshaft is a 4340 Forged steel 4.150 stroke crank, this is an exellent quality crankshaft with a full .125 raidus on both the main and connecting rod journals. Connecting rods are 4340 forged steel comp H beams, they are 6.700 long. These rods feature 7/16 cap screw bolts, and full floating wrist pins. The entire rotating assembly has been Correctly balanced using. Most machine shops skip this very important step due to the increased time and cost. This engine will run smooth and have no vibration. When you assemble the motor you will need to use a 1968-1978 460 Ford balancer and flywheel. The correct flywheel and balancer will have NO weight(INTERNAL BALANCED). 4. Pistons in the engine are Probe industries forged aluminum SRS series. They are Flat top and with the heads installed on this engine they yeild a 10.25:1 comperssion ratio. This works out great for pump gas. 5. Heads on this engine are 95cc ProComp motorsports aluminum. They are assembles with Severe duty Qual cast 1 piece stainless steel valves, 2.19x1.71 valves. Heads have high flowing D shaped exhaust ports and standard 460 size round intake ports. They accept standard exhaust headers and intake manifolds. The heads are completely assembled with all ProComp components, stainless steel valves, chromolly retainers, 7/16 screw in studs, and guideplates for 3/8 pushrods. Valve springs are also manufactured by ProComp, they are 1.550 diameter with 130lbs closed pressure. They will accomadate .650 lift and work well with most mechanical and hydraluic flat tappet camshafts.Heads are bolted down and torqued with a new set of Chromalloy studs with 12 point nuts and washers!! 6. This engine with a 850cfm holley carburetor and a air gap intake manifold will produce 632hp and 690 foot pounds of torque all on 91 octane fuel!!!! This engine is ready to install valvetrain and assemble. As I have said before this would make for a great marine engine or a street torque monster. Local pickup and California residents must pay 8.225% sales tax or furnish a completed resale card for my records. If you have questions please e-mail. Thanks for looking. Please feel free to ask any and all questions directly thru ebay messaging system, I will answer all questions, I want you happy!!. I cant include personal contact information its against ebay policy, After purchase on ebay we can exchange contact information as needed.
Price: 5999.99 USD
Location: Fresno, California
End Time: 2024-02-07T15:54:26.000Z
Shipping Cost: 750 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Warranty: Yes
Vintage Part: Yes
