Grundfos CME 15-3 A-S-I-E-AQQE Booster Pump - 99126478

Description: Used Grundfos CME 15-3 pump item number 98126478. This is the older version likely manufactured in 2018. They appear to be in good working order and were connected to the water system when I purchased them at auction as a part of a bigger lot. That lot contained over 20 pumps of which I only needed a few. So the rest are up for sale. Brand new these pumps were about $4000 each. Additional Information: CME15-3 A-S-I-E-AQQECME is a compact horizontal multistage centrifugal pump, close-coupled with a:3-phase, 200-230 V, 60 Hz Hz. Foot mounted E-motor. The CME motor includes frequency converter and PI-controller integrated in the motor terminal box. No additional motor protection is required as both motor and electronics are protected by integrated overload and temperature protection. The pump is with axial suction port and radial discharge port including a special designed mechanical shaft seal in the solution AQQE. Shaft, impellers, chambers and filling plugs are made of stainless steel. Suction and discharge are made of Stainless steel.The CM can also operate as a CME by connecting the motor to a CUE. Please find more information in the CUE part of Win/WebCAPS.An external sensor can be connected if controlled pump operation is required for:flowdifferential pressuretemperature controlSensor kits are available as accessories.The pump is equipped with a control panel that enables setting of:Required set-pointMin.Max.Stop.The control panel has indicator lights for "Operation" and "Fault".Communication with the pump is possible by means of Grundfos R100 remote control enabling further settings as well as reading out of a number of parameters such as :Actual valueSpeedPower inputPower consumptionThe terminal box holds terminals for the connection of:External start/stop (potential-free contact)External remote setpoint setting via analog signal, 0 - 10 V, 0(4) - 20 mA,10 V voltage supply for setpoint potentiometer, Imax = 5 mA,sensor, 0 - 10 V, 0(4) - 20 mA,24 V voltage supply for sensor, Imax = 40 mA,input for forced control to MIN, MAX, External fault or Flowswitch (potential-free contact)potential-free fault signal relay with changeover contact,RS485 GENIbus.

Price: 499 USD

Location: Ithaca, New York

End Time: 2024-08-19T17:21:38.000Z

Shipping Cost: N/A USD