Description: This is a set of the four retaining washers for the Moto Parilla high cam engines. These are laser cut from 20ga (larger 3) and 24ga (smallest one) steel. This covers the entire engine: drive chain sprocket, lower cam chain sprocket, primary gear, and the upper cam chain spindle. These are provided flat, as pictured, and require heating to red hot with a propane torch to bend the retaining tab over on to the washer body. The upper cam chain spindle washer only needs to be bent to a 45 degree angle as it sits in a slot in the engine case. Minor fitting/filing may be required to seat cleanly into the locking channel after bending. Note: I always lap in the tapered faces prior to installation, use blue Loctite on nut threads and replace worn woodruff keys. All adds up to a superb fit, and it very important for the drive chain sprocket/output shaft. Shipping USPS flat rate envelope. Will combine shipping for other items I sell here for the high cam engine like: valve cover gaskets side cover gaskettransmission gasketclutch cover gasketintake gasketbase gaskets (175, 200, 220, 250)center case gasket Thank you!
Price: 20 USD
Location: Knoxville, Tennessee
End Time: 2025-01-25T18:24:15.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: Unbranded
