PC USB Four(4) Relay Board with temperature sensor for Home Automation

Description: PC USB Four(4) Relay Board with temperature sensor for Home Automation This is USB Four channel SPDT relay board with connected TCN75A temperature sensor. The relays can handle up to 15A and the sensor can measure temperature from -40 C up to +100 C with accuracy +-0.5 C (typical) and +- 3 C (max). The software we provide makes this relay card ideal for applications like temperature monitoring (USB thermometer), temperature loging with computer or simple usb thermoregulator. Features Based on our device: USB Four(4) Channel Relay Module (with difference that is it has attached TCN75A sensor) Relays: 4 SPDT Relays RAS-05-15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC) PCB parameters: FR4 / 1.5mm / two layers / metalized holes / HAL / white stamp / solder mask / еxtra PCB openings for better voltage isolation / doubled high voltage tracks Sensor temperature range: -40°C up to +100°C with accuracy +-0.5°C (typical) and +- 3°C (max) Sensor cable: ~ 2 meters (mounted directly to the board, can not be removed) Power supply: fully supplied from USB port Current consumption: 400 mA Chipset: FT245RL. Datasheet - here. Drivers - here Power led: Yes Relay leds: Yes PCB size: 77mm x 56mm x 17mm Software: Windows/Linux - download and support page: here Command Line software: Windows/Linux - download and support page: here - New User manual: Please read the manual carefully before using the device (download from here) The auction includes 1 x USB Four Channel Relay Board with sensor TCN75A Denkovi USB 4 Relay Recorder - The software is available for download from this link - here Application Examples Home automation Robotics Alarms Temperature monitoring (USB thermometer) Temperature loging with computer Simple usb thermoregulator (control relays depending on the sensor temperature value) Caution Please note the attached TCN75A sensor is not designed as a probe but it is only pcb with IDC connector (as it is shown on the picture). It is not encapsulated and it is strongly recommend to use it in dry environment. Do not use it for temperature measurements inside water or other liquids otherwise it may be short-cut and cause permanent damage of the relay board. The sensor flat cable is connected directly to the USB 4 Relay board idc connector in the factory and it can not be removed. THE DEVICE CAN NOT WORK WITHOUT COMPUTER! Denkovi USB 4 Relay Recorder Software for temperature monitoring,loging and controlling Denkovi USB 4 Relay Board and temperature sensor TCN75A Temperature and relays states log Auto/manual export the log in .XML file Graph plotting Shows minimum, maximum, average and current temperature Support °C and °F Temperature range: from -40°C up to +100°C TCN75A accuracy: +-0.5°C (typical) +-3°C (maximum) Automaticaly control relays based on the sensor value OS: Windows (tested on XP, Vista, 7) and Linux (tested on Ubuntu, OpenSuse) For more information about the software, screen-shots, detailed description and support- here or contact with us. DRM Software Denkovi Relay Manager (DRM) is multiplatform software for easy controlling all kinds of Denkovi relay boards (USB,SNMP,TCP/IP) CAUTION! Using of Denkovi Relay Manager (DRM) Software with devices which are not manufactured by Denkovi Assembly Electronics LTD is not allowed! The item is supported by DRM Software. You can control only the relays however (the sensor is not supported). DRM Software will hep you to save money for expensive software and time in programming. It allows you to switch ON/OFF your devices at particular date and time, turn ON/OFF the relays with pulses or control them via specific sequence. If you have ordered at least one of our relay boards from this list you may turn your PC in powerful automation tool. Multiplatform software: supported by Windows/Linux (ver. 2.0) Control up to 32 relay boards User-friendly intuitive interface Save/Load file Control mode: single and multiple setting of the relays Single pulse with adjustable delay from the control mode (ver. 2.0) Timer mode: create timer playlist for the relays Weekly mode: each relay may be turned ON/OFF on each day of the week Calendar mode: each relay may be turned ON/OFF on particular date at particular time Pulse mode: each relay may work in pulse mode by setting duration for ON and duration for OFF. Adjustable number of pulses (ver. 2.0) Each relay from each relay board can work independently in some of the five modes Each relay board and each relay can be named by the user Indicator panel Auto load function - the last working file is loaded when DRM is started Auto connect function - when the relay board is disconnected DRM will keep trying to find and when this is done, the relay board will be connected again Auto start function - DRM software starts when the OS starts (currently this is not available for Windows 8 and Linux) Auto set function - DRM will set the relays automatically when the relay board is connected Possibility of DRM to starts when PC boots and continues to work from the last saved point For more information about DRM Software, screen-shots, detailed description and download - here Denkovi Relay Command Line Tool The main goal of this project is to help you to use our USB relay boards easily and without any specific knowledge how do they work. This tool is actually shell for all our USB relay boards and it does not matter which is the relay board, the command is the same. Just type one command and the the tool will set, get relay status or even will take temperature value from the board sensor (if any). It can be integrated in other software and you don't need to know much about how the USB relay board protocol. With this tool it is like a "game" and it takes literaly minutes to create for example PHP script and control the USB relay board from smartphone browser. Typical applications for this software are: Create desktop icons to turn particular relays Create BAT/BASH files to make more complex logic (like timers for example) The commands can be executed from PHP script Control our USB relay boards from Android / iPhone mobile devices The USB relays can be controlled from each software/platform which can run external executable files or commands in command line promt Example commands: LIST COMMAND - lists all devices connected to computer. java -jar DenkoviRelayCommandLineTool.jar list STATUS COMMAND - display relay(s) status(es). java -jar DenkoviRelayCommandLineTool.jar DAE0006K 4 2 status java -jar DenkoviRelayCommandLineTool.jar DAE0006K 4 all status SET COMMAND - set relay(s) state(s). java -jar DenkoviRelayCommandLineTool.jar DAE0006K 4 2 1 java -jar DenkoviRelayCommandLineTool.jar DAE0006K 4 all 0 java -jar DenkoviRelayCommandLineTool.jar DAE0006K 4 turn 1110 TEMPERATURE COMMAND - get the temperature value java -jar DenkoviRelayCommandLineTool.jar DAE0006K 4 temp C java -jar DenkoviRelayCommandLineTool.jar DAE0007l 4 temp F For more information - here For tool download - here Useful Links User manual - here Drivers page - here FTDI official page with source code examples - here Software download link - here Command line software download - here Images Please read before buy!

Price: 38.63 USD

Location: Europe

End Time: 2023-12-11T07:46:21.000Z

Shipping Cost: 34.87 USD