Description: DON'T FORGET OUR EPOXY MIXING KITClick The Link To Add To Order https://www.ebay.com/itm/222623932456EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system. The container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system. The container must withstand the tenacity of the chemical and must be free of contamination. Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature. MIXING KIT CONTENTS 1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams 4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix CupsOne Size Fits All Powder-Free Latex Gloves 2 Each Graduated SyringesWooden Stir SticksBrush PLEASE CHECK OUT OTHER AVAILABLE RESIN SYSTEMS AT OUR eBay STOREFor our complete listing, please Visit our eBay store! IMPORTANT NOTICEYour purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PCI and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, and the manner of that use and whether there is any infringement of patents is the sole liability of the user.
Price: 83.92 USD
Location: Ontario, California
End Time: 2024-07-25T20:11:45.000Z
Shipping Cost: 0.72 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
PCB CIRCUITRY MASKING: Opaque Black, Tamper-Proof, Permanent Sealant
MPN: MAXMCR96OZ
ENCAPSULATING RESIN: Printed Circuit Board Potting Compound
WATER PROOFING: For Continuous Water Immersion Or Buried Applicati
Modified Item: No
California Prop 65 Warning: SARA TITLE III SEC. 304 EHS RQ (lbs): N/A SEC. 302 EHS TPQ (lbs): N/A SEC. 312 Hazard Category: DELAYED HEALTH HAZARD SEC. 313 Hazard Category: NONE CERCLA HAZARDOUS SUBSTANCE & REPORTABLE QUANTITIES: This product does NOT contain any hazardous substances listed in 40 CFR 302.4. CALIFORNIA PROP. 65 Resins based on rosin-derived resins are NOT listed on California’s Prop. 65 toxic substance list. ODC STATUS/CLEAN AIR ACT/CLEAN WATER ACT: The components of this product are NOT found to contain any ozone-depleting compounds or hazardous air pollutants. None of the chemicals in this product are listed as Hazardous Substances, Priority Pollutants, or Toxic Pollutants. For more information go to https://www.p65warnings.ca.gov/
Brand: MAX EPOXY RESIN
Type: Potting Compound Epoxy Resin
POTTING COMPOUND: Printed Circuit Boards & Electronic Circuits
Model: MAX MCR Black A/B 96-OZ Kit
Country/Region of Manufacture: United States
