Description: 15 Oz Aerosol Satin Gloss Level Matches factory finish on many automotive exterior trim components. No primer needed for adhesion. SEM Trim Paint Surface Preparation: Wash the part thoroughly with 39362 SEM Soap. Clean with good quality Grease and Wax remover such as SEM 38373. Sand with 400 grit sandpaper and reclean with G&W remover. Mask off all areas not to be coated to protect from overspray. Apply light mist coats evenly allowing 5-10 minutes between coats. Several thin coats are better than 1 heavy coat. Salesman Note: Don't rush to install the part. Trim Paint adhesion improves with time. Full hardness and maximum adhesion should be obtained in about 48 hours. Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.No primer requiredRetains flexibilityGreat coverageMatches OEM appearance
Price: 169.99 USD
Location: US
End Time: 2024-10-31T22:23:59.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Sem
MPN: 39143_CASE
