SVT Low CG Multipurpose Skid for Element and SCX10 BowHouse RC BEL-0020

Description: On the ELEMENT: Lowers stock transmission by 3mm without impacting ground clearanceImproves driveline anglesAllows installation of Axial AX10 3-gear transmissionWorks with solid front axle and IFS versions of the ElementWorks with both transmission orientationsFits stock Element pivot ballsOn the SCX10 / SCX 10 II: Lowers transmission by approx. 1mm without impacting ground clearanceAllows installation of Element Stealth X transmissionAllows installation of Element IFS conversion without having to trim skid mounting holesFits stock Axial pivot ballsPackage includes: 1 skid1 transmission spacer4x M3 x 20mm set screws4x M3 x 12mm flat head screws4x M3 locknuts2x M3 x 12mm BHCS Installation notes Start by removing stock skid. Save the screws and locknuts used to attach upper links to the chassis, and the screws used to attach the skid in each of the 2 middle holes on each side of the skid.Insert SVT Multipurpose skid into chassis and use stock screws to attach the skid to the chassis in each of the 2 middle holes on each side.Use stock screws and locknuts to attach rear and front (if applicable) upper links after installing the skid.Use M3 x 20mm set screws in place of stock set screws to attach front and rear lower links (or IFS skid and rear lower links if running IFS).Use 4x M3 x 12mm flat head screws to fasten transmission to skid.Use 2x M3 x 12mm BHCS screws and M3 locknuts to attach skid to chassis in forward-most skid holes when running IFS setups. You do not need to use these screws if running solid front axle.You do not need to use screws in the forward-most and rearward-most slider holes.Go out and play!REVIEWS

Price: 34.99 USD

Location: Cookeville, Tennessee

End Time: 2024-08-19T20:28:52.000Z

Shipping Cost: N/A USD