Thorens TD-125, TD-125 MKII, & TD-126 Replacement Spring Kit for Turntable

Description: New for 2023! The kit now includes six new SBR rubber chassis isolation washers to replace your fifty year old dried out ones. (Also sold separately in my eBay store) Thorens TD-125 and TD-125 MKII Replacement Spring Kit for Turntable (Will also work with TD-126 models) Replace your tired springs. Includes three fresh springs engineered to match the original Thorens springs, as well as three upper grommets and three metal washers. At last, after decades without true Thorens replacement springs, I have had new springs manufactured by one of the most respected spring-makers in the US. (And then independently verified) These high quality springs were reverse engineered from original Thorens TD-125 model springs...these are not Linn LP-12 springs in disguise! (LP12 springs, by the way, have completely different specs in every key facet of the design) Obviously, the heart of the suspended turntable design is the springs. They isolate the tonearm and platter in a frequency range that optimizes resonance control. If your tired springs are not doing the job they were designed to do, the performance of the entire turntable suffers. (See photo #3, the original spring on the right is shorter because it's been compressed for 40 plus years) This new kit not only contains three fresh non-magnetic springs, it contains:Three upper rubber grommets in a taller design to help increase spring stability in the horizontal planeThree metal (316 stainless steel) washers and three plastic washersSix SBR rubber chassis isolation washers which help with isolation of the top plateAs with my other kits and manufactured parts, I have tried to meet or exceed the original product. In this kit that is represented by 1) using non-magnetic, non-rusting 316 stainless steel nuts; 2) having the springs coated with black oxide to prevent corrosion; and 3) the taller design grommets mentioned. Please note the LOWER GROMMET in one picture is NOT included. You use the existing lower grommets. In terms of installation, this is of medium to hard difficulty. It involves dis-assembly of a good part of the turntable. NOT for the faint of heart. Ideally, you should have very good mechanical and/or Thorens TD-125 knowledge.

Price: 42 USD

Location: Exeter, New Hampshire

End Time: 2023-11-12T16:24:27.000Z

Shipping Cost: N/A USD