Waveshare ESP32-S3 5inch Capacitive Touch Display Development Board 5-Point

Description: Description ESP32-S3 5inch Capacitive Touch Display Development Board, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard Antenna, Options For 800×480/1024x600 Display ResolutionESP32-S3-Touch-LCD-5Integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces Version OptionsESP32-S3-Touch-LCD-5Standard version800×480 pixels, 160° viewing angle ESP32-S3-Touch-LCD-5BUpgraded version1024×600 pixels, 178° viewing angleFeaturesThis product is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 5inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applicationsEquipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequencySupports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antennaBuilt in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAMOnboard 5inch capacitive touch display, options for 800×480/1024x600 resolution, 65K colorSupports capacitive touch control via I2C interface, 5-point touch with interrupt supportOnboard voltage regulator, supports 7~36V wide range power supplyOnboard RTC chip and rechargeable battery to ensure time data is not lost when power lossOnboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.Supports passive and active digital input, with bi-directional optocoupler isolationSupports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking currentOnboard LED indicators for indicating the power and battery recharging statusSupports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenariosApplication ScenariosIPS Display PanelExcellent display performance, 178° wide viewing angle ** 178° viewing angle for the Upgraded Version, and 160° for the Standard VersionCapacitive 5-point touchsupports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interactionSupports multiple peripheralsSupports the expansion of multiple peripherals via CAN, RS485, I2C and isolated IO interfacesWhat's On BoardESP32-S3-WROOM-1-N16R8The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB FlashTF card slotUSB Type-C portBOOT buttonPress and hold while powering on for program burningRESET buttonOptocoupler isolationTouch panel connector5inch display panel connectorRS485 and CAN terminal resistors selectionclose by defaultBattery power supply ON/OFF3.7V single lithium battery GH1.25 headerStatus IndicatorsDONE: Lithium battery charging completed indicatorCHG: Lithium battery charging indicatorPWR: Power supply indicator(the CHG will blink and DONE will light on when connecting with DC power supply and without lithium battery connected or battery switch is OFF) 7-36V DC power supply terminalI2C interface terminalVOUT pin output 5V/3.3V (switching by onboard resistor)CAN interface terminalRS485 interface terminalDigital output5~36V, open-drain output, output load: 450mA per channel (MAX)Input signal common terminalNC: dry contact passive inputConnect to power supply positive: digital input low active, for NPN wet contact active input, 5V-36V DCConnect to power supply negative: digital input high active, for PNP dry contact active input, 5V-36V DCDigital input5~36V, supports passive / active input (NPN or PNP)I2C VOUT output selectionfor switching output valtage and I/O level of I2C VOUT, 3.3V by defaultCS8501Lithium battery recharge managerPCF85063RTC chip for providing accurate time controlAP3032KTR-G1Display backlight boost converterCH422GIO expansion chip SP3485RS485 transceiverTJA1051T/3/1JCAN transceiverSGM2212-3.3800mA low-noise LDORechargeable Lithium batterySupport Batch CustomizationSupport software and hardware customizationIncluding hardware interface, LOGO, label, case and web page, etc.outline dimensionsResources & ServicesWiki: www.waveshare.com/wiki/ESP32-S3-Touch-LCD-5ESP32-S3 LCD selection guideModelESP32-S3-Touch-LCD-4ESP32-S3-Touch-LCD-4.3BStandard Ver. / Case Ver.ESP32-S3-Touch-LCD-4.3ESP32-S3-Touch-LCD-5Standard Ver. / Upgraded Ver.ESP32-S3-Touch-LCD-7basic parametersProcessorHigh performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequencyWi-Fi / BluetoothSupports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antennaFlash/PSRAM16MB Flash + 8MB PSRAM8MB Flash + 8MB PSRAM16MB Flash + 8MB PSRAM8MB Flash + 8MB PSRAMPower SupplyTypeC 5V + DC 7-36VTypeC 5VTypeC 5V + DC 7-36VTypeC 5VLCD parametersResolution480x480800x480Standard Version: 800x480Upgraded Version: 1024×600800x480Display InterfaceRGBDisplay PanelIPSViewing Angle160°Standard Version: 160°Upgraded Version: 178°170°Touch TypecapacitiveTouch PanelToughened Glasscommunications interfaceCAN, RS485, I2C, USBCAN, RS485, I2C, USB, UART, SensorCAN, RS485, I2C, USBCAN, RS485, I2C, USB, UART, SensorDigital Input-2DI, 5~36V, passive input / active input (NPN or PNP), built in bi-directional optocoupler-2DI, 5~36V, passive input / active input (NPN or PNP), built in bi-directional optocoupler-Digital Output-2DO, 5~36V, open-drain output, output load: 450mA per channel (MAX)-2DO, 5~36V, open-drain output, output load: 450mA per channel (MAX)-othersOperating Temperature0℃ ~ 65℃Dimensions (L×W)84.2×84.2mmStandard version: 112.4×75.1mmCase version: 116.3×79mm106.1×67.8mm127.7x87.45mm192.96×110.76mm Package Content Weight: 0.007 kgOPTIONS ESP32-S3-Touch-LCD-5 (with bottom wiring 16PIN screw terminal) x1

Price: 46.1 USD

Location: Shenzhen, Guangdong

End Time: 2024-09-22T08:03:33.000Z

Shipping Cost: 0 USD