Description: PLEASE READ THE ENTIRE DESCRIPTION TO KNOW EXACTLY WHAT YOU ARE GETTING WITH THIS ORDER! - CNC machined from Wenge. Roughed out and will require finish sanding for blending of edges and neck pocket fitment. Wenge is an extremely difficult wood to machine and it chips out extremely easily. The are some spots where this neck chipped out during machining. I will supply 3 pieces of thin Wenge left over from machining this neck to try and fill and super glue in patch pieces. It should blend pretty well that any repairs should be hard to notice. - Designed for a 21 or overhanging 22 fret neck. Nominal dimensions are a 2 3/16" heel, 1 11/16" nut, and 9/16" head stock. Heel width is about 2.21" wide as machined. - The truss rod slot is designed for a low profile StewMac Hotrod truss rod #2652 (not included!!!...you will need to purchase one!). All machining and drilling is done. All you have to do is buy one and drop it in. I may be able to supply a truss rod for an extra $18, but message me about availability and how to purchase. - You can see the profile of the neck at roughly the 1st and 12th fret. Thickness is around 0.58" at the first fret and 0.61" at the 12th fret. After adding a 1/4" thick fret board the thickness would be about 0.83" and 0.86" respectively. The heel is 3/4" thick. - Tuner holes designed for 10mm tuners. I have recently began reaming the holes out with a 10mm reamer so they are ready to accept tuners with no work to finish the tuner holes on your end.
Price: 69 USD
Location: Salisbury, Pennsylvania
End Time: 2024-09-13T01:22:35.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
Type: Neck Blank
Material: Mahogany
Country/Region of Manufacture: United States
To Fit: Electric Guitar
